Dengan menggunakan software ini kita dapat menjalankan OS windows maupun Linux melalui flashdisk yang terinstall Hiren boot cd ini. Baca juga: Cara Menginstall File ISO Dengan Flashdisk. Cara Install Hiren’s Boot CD ke Flash Disk. Download dan extract Hiren’s BootCD v15.2. Download dan jalankan Universal USB Installer.
I need to use SpinRite on my notebook which has no CD-ROM.
How can I install and run SpinRite from a USB thumbdrive? Such that I could boot the notebook up with a thumbdrive and start SpinRite.
Are all USB thumbdrives capable of booting? I don't even know how to make them boot.
Peter Mortensen8,4561616 gold badges6161 silver badges8585 bronze badges
SnackmooreSnackmoore
7 Answers
I tried the following.
- Download and install 'HP USB Disk Storage Format Tool - v2.1.8' fromhttp://files.extremeoverclocking.com/file.php?f=197
Click on Blue 'Primary Download site' -- not Green 'Downloads' advertisements
or fromhttp://www.19systems.net/HP-USB-Tool-v2.1.8.exe - Download 'Windows 98/DOS boot files' fromhttp://files.extremeoverclocking.com/file.php?f=196
Click on Blue 'Primary Download site' -- not Green 'Downloads' advertisements
or from http://www.19systems.net/Win98-Boot-Files.zip - Unzip Win98 files into a temporary folder such as Win98boot
- For pre-Vista Run 'HP USB Disk Storage Format Tool'.For Vista and beyond, right click it and 'run as administrator'
- Use it to format the USB drive and enable the option to make it bootable with files from Win98boot
- Copy spinrite.exe to the formatted USB drive
- On the target notebook, edit boot sequence so that boot from USB is ahead of HDD
- Boot the notebook with it and at DOS prompt, run spinrite.exe
You can now run SpinRite on a CD-ROM-less machine.
Community♦
SnackmooreSnackmoore
Also, You can run the spinrite installer and choose to install onto a drive.and 'Hold down the letter of the drive on the keyboard and press install'then it boots right into spinrite (Just tested)
TravisTravis
I could not get SpinRite 6.0 to boot from my USB drive by using its built-in installer. I tried the accepted answer but it didn't work because HP USB Disk Storage Format Tool reported 'Device media is write-protected' (but for some reason it was writable by everything else).
Here's what worked for me:
- Download Rufus, a tool for making bootable USB drives. At the time of this writing its version is 2.17.1198.
- Run Rufus with the following settings:
- MBR partition scheme for BIOS or UEFI
- FAT32
- 16 kilobytes
- SpinRite 6.0
- [Unchecked] Check devices for bad blocks
- [Checked] Quick format
- [Checked] Create a bootable disk using FreeDOS
- [Checked] Create extended label and icon files
- Run the SpinRite 6.0 installer and create an
.iso
file. - Mount the
.iso
file and copySPINRITE.EXE
to the USB drive. - ? Boot the drive. ?
- DOS should start. Run
spinrite.exe
.
1,06222 gold badges1515 silver badges2323 bronze badges
Seems to be described here: https://www.grc.com/sr/faq.htm
How do I make a bootable USB thumb drive?
Hewlett Packard (HP) makes an easy-to-use utility called “HP USB Disk Format Tool”, which includes a 'Create a DOS Startup Disk' option. It's freely available from: http://files.extremeoverclocking.com/file.php?f=197 (mirror) along with the Windows 98/DOS boot files.
Run the HP tool, pointing it at the directory where you unzipped the DOS boot files, and it will automatically build a bootable DOS USB drive using those files. Next, copy your original SPINRITE.EXE file onto the root directory of your USB drive. Once done, reboot the system with your BIOS configured to boot from USB drives. At the DOS prompt, type spinrite to start SpinRite.
Note that this also has the advantage of using real Microsoft MS-DOS files rather than the “FreeDOS” files which accompany SpinRite. The real, original MS-DOS may operate more consistently on less compatible systems.
Vinayak8,72744 gold badges4141 silver badges7575 bronze badges
Christoffer MadsenChristoffer Madsen
SpinRite 6.0 lets you install make any writable drive bootable using an option on its main menu, as noted above by Travis. You may have to hunt around a bit in your BIOS Setup menu to find the option for elevating you drive, such as a USB flash drive, to the first position.
You can make an inexpensive, quiet 'SpinRite machine' by buying a Zotac mini-PC without a hard drive and just booting from a USB flash drive or memory card. Plug in a hard drive dock (toaster) so you can easily prepare or refresh any of your 3.5 or 2.5 inch drives.
WellsWells
For *nix users, it is possible to boot Spinrite by just writing the floppy disk image of Spinrite to a usb drive.
or
Where
sdx
is your usb drive. Root privileges required.If you're feeling fancy, you can also integrate Spinrite onto a syslinux or extlinux usb drive with a boot menu. For example, here's a minimal working
syslinux.conf
that also includes memtest on a single usb drive:See the syslinux documentation for more details about creating boot menus.
isuldorisuldor1,33133 gold badges1616 silver badges2828 bronze badges
I've heard that SpinRite can be ran as virtual machine. This won't require a physical CD drive as SpinRite is loaded onto the VM from an ISO file.
Dan StevensDan Stevens
Not the answer you're looking for? Browse other questions tagged hard-driveusbbootusb-flash-drivespinrite or ask your own question.
Similar Content
- By ThatsMattSalve, sono nuovo nel forum e mi serviva una mano nell'installazione dell' ultima versione di MacOs sul mio notebook HP Pavilion 15-ak112nl.
Specifiche Tecniche:
CPU: Intel Core i7-6700HQ (2.60 / 3.50 GHz, 4 core, 6 MB CACHE L3).
Scheda Grafica: Intel HD Graphics 530 + NVIDIA GeForce GTX 950M 4 GB DDR3.
Hard Disk: 1 TB SATA 5400 rpm.
Ram: 8 GB DDR3L-1600.
Audio: altoparlanti stereo Bang & Olufsen PLAY.
Rete: LAN 10/100, WLAN 802.11b/g/n, bluetooth 4.0 (Miracast).
Grazie in Anticipo a chi mi risponderà - By fusion71auClover r4961 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
Installation
1. Download and unzip 'EFI_Clover_r4961 for VMware.zip'. Mount Clover-v2.4k-4961-X64.iso by double clicking on it.
2. Mount your VM's EFI System Partition eg in terminal
sudo diskutil mount disk0s1 3. Copy EFI folder from step 1 into the EFI partition
4. Shutdown the VM, add bios.bootDelay = '3000' to your VM's vmx file
5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM. - By gengik84Ciro82>>Thanks
Uno dei tre Requisiti:
Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
Cercate una voce del tipo “Sata Mode”e settatela in AHCI
Secure Boot: disabilitare o altri sistemi operativi
CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
VT-x / VT-d disable
*Nota: Secure boot e csm valido solo per bios UEFI
Materiale Occorrente
'OS X (Versione App.Store)”
USB 8GB *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui 'lavoreremo,di questa dimensione
ShowAllfiles
kext Wizard
Bootloader Clover_2.3k_r xxx: http: //sourceforge.n.../cloverefiboot/
Clover Configurator: http: //mackie100proj...a.org/download/
FakeSmc.kext: https://github.com/kozlek/HWSensors/releases
In allegato,a fondo pagina troverete un 'pacchetto' contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext:
App alternative:
ESP Mounter Pro: per montare la partizione EFI
Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3: Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
“CONDIZIONI OBBLIGATORIE”
PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in Mac esteso Journaled.
PUNTO 2: che l’installer di OSX si trovi in Applicazioni
Utility Disco
Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
Immagine
Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
Rimane ovviamente invariato nome della usb in >> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
Da utility disco selezionate la usb, cliccate su inizializza.
dal menù a tendina scegliete la relative impostazioni
Immagine
Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare 'mostra tutti i dispositivi'
Immagine
METODO 1: 'Install_Mac_OS_X.Command' Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
Include la possibilità di scelta di tre versioni di osx
Yosemite El Capitan Sierra Il risultato finale è come quello del metodo 'manuale' descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia.
Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
Esempio
Metodo 2
L'intento è quello di usare la procedura fornitaci direttamente da Apple, 'createinstallmedia', introdotta con Mavericks.
Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
Durante il post installazione alcune operazioni ne richiedono l’ uso.
Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
Per favorirvi vi ho allegato i comandi già “pronti”, i quali li potrete copiare ed incollare sul terminale.
A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
Comando per creare USB con Yosemite:
sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install OS X Yosemite.app --nointeraction
Comando per creare USB con El Capitan
sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install OS X El Capitan.app --nointeraction Comando per creare USB con Sierra
sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install macOS Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14....
BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..
COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
Immagine
Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
*NOTA*:
Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
Finita questa ulteriore fase , l'installazione sarà terminata
METODO 'MANUALE'.... (lascio per futura memoria-Compatibile fino a 10.12)
Bootloader
**Nota:** Installazione in UEFI dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in modalità Legacy.
Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
Fatto questo dobbiamo installare Clover sulla usb.
A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
Lanciate il pkg.
Immagine
Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
Successivamente clicchiamo su 'Ad Hoc'
Per Installazione UEFI
Mettete i flag : Installazione solo per avvio UEFI
: installare Clover nella ESP
: Driver64UEFI AptioMemory --> (consigliato)
: Driver64UEFI ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
: Selezionate l'altri driver come da successiva immagine,
*Nota: Altri driver che si possono usare al suo posto sono:
informazioni
Proseguite con l’installazione.
Immagine
** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
Per installazione Legacy
Immagine
Impostazione per config.plist:
Con clover configurator “montate” la partizione EFI della usb.
1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI selezionando l’apposito pulsante “Mount Partition”
Immagine
3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
Immagine
5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
Immagine
6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
Immagine
7) Sezione System Parameters: Su inject kext mettete YES
Immagine
Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
Info:
Recatevi in EFI/Clover/kext/10.x
X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
Copiatevi all’interno FakeSmc.kext
*Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
Immagine

Per High Sierra:
Scaricare il driver apfs.efi a fine guida, collocarlo:
--> EFI/clover/Driver64UEFI se stiamo usando UEFI
--> EFI/Clover/Driver64 se stiamo usando Legacy
Per chi volesse continuare ad usare HFS vi rimando a questo post:
Come installare High Sierra in HFS direttamente dalla usb
Utenti Laptop: Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
in EFI/Clover/acpi/Patched della usb
--------------------------------------------------------------------
Per Mojave:
Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
--> EFI/clover/Driver64UEFI se stiamo usando UEFI
--> EFI/Clover/Driver64 se stiamo usando Legacy
Versione di clover non antecedente a V_4015
Volete usare HFS?
E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
nel caso guardate...
Mojave in HFS
Oppure direttamente da usb
Fatto questo avrete la vostra USB bootable per installare OSX.
………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
*NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
Finita questa ulteriore fase , l'installazione sarà terminata
**NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
Update: Fakesmc e sensors versione 6.26
Post installazione... post #2
Buon Hack….. 
Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
le info le trovate a questo post
Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
Pacchetto.zip
Pacchetto-2.zip
Pacchetto-Fake+Sensors 6.26.1440.zip
C_I_M.zip
apfs.efi-10.14-beta1_No_Log.zip - By kushwavezAcer Aspire V15 V5-591G - Mojave 10.14.5
(Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
Specifications:
- Motherboard: USOPP_SLS (Skylake-H PCH)
- BIOS:Insyde Corp. v 1.15
- CPU:Intel Core i5-6300HQ 2.3 GHz (Skylake)
- GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
- RAM:SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
- WiFi + Bluetooth:Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
- Audio:Realtek HD Audio: ALC 255
- Ethernet: Realtek RTL8168/8111
- Card Reader:Realtek USB 2.0 Card Reader (USB2.0-CRW)
- Webcam:HD Webcam
- HDD:TOSHIBA MQ01ACF032 320 GB HDD
- SSD:SPCC M.2 230 GB SSD
- Display:1366x768 (15.6', Matte)
- Battery: 6 cell 56Wh / 5040mAh
- Connectors:
1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad:Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
Working:
- Wi-Fi (with BCM94352Z)
- Bluetooth hand-off (With BCM94352Z)
-Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
- Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use 'Rec. ITU-R BT. 709-5' Color Profile (System Pref. -> Displays -> Color)
-HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
- Audio (ALC 255):(Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
- Ethernet Realtek 8168/8111: RealtekRTL8111.kext
- App Store, Messages, FaceTime, Siri, iCloud(native)
- Integrated webcam(native)
- 3.0 USB (native)
- Touchpad and Keyboard(ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
- Battery info:Install ACPIBatteryManager.kext with Kext Utility or other installer.
- Sleep Mode
- SSD with TRIM enabled (to enable trim, open Terminal and write 'sudo trimforce enable')
Not working:
- Original Wi-Fi (Qualcomm Atheros QCNFA344A): unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
- NVIDIA GeForce GTX 950M: Optimus not supported.
- Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: 'USB2.0-CRW' Prod ID: '0x0129' Ven ID: '0x0bda (Realtek Semiconductor Corp.)'
For Wi-Fi:
- 1st method:You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
-2nd and I think the best method:Replace your M.2 Qualcomm Card with a compatible BCM94352Zcard (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareData.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
Issues:
- None
BIOS Settings:
- BIOS version 1.15 (irrelevant)
- Secure Boot: Disabled
- Touchpad: Advanced
- Boot mode:UEFI
Getting ready for Installation:
- Download the install zip (bootpack & postinstall): Click here -> acer_aspire_v591g_installfiles.zip
Installation:
- Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
- Copy my Clover folder to the USB's EFI folder
- Boot with the Installer USB
- If you stuck in boot, reboot and in the Clover bootloader select 'config_debug.cfg' -> you'll have more informations about the freeze
Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
If you have a single RAM and getting panic at boot, then you need to edit the 'config.plist' with these (SMBIOS->after 'Version 1.0'):
->Edit 'Frequency' and 'Size' to match your RAM values
<key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>
PowerManagement fix:
Set HWPEnable=YES in Clover (already set), CPUFloor to '700', Frequency to '2300' and '3200'(Normal and Turbo, if you have i7-6700HQ version then it should be '2600', '3500') and 'FrequencyVectors' from '0x0d000000' to '0x07000000' in 'S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist', MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change 'MatchOS' to 10.13):
<key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
Elan SmartTouchpad
I only use scrolling, one-, double- & tripletap
If you want to try other gestures go to this link for more informations, options (v4.7 beta 5) -> DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
Before updating to a new version of Mojave please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
Mojave & Windows 10 Dual-Boot:
Dual-boot clean install (on one drive), UEFI Only:
Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac), Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart, Boot into your Win installer, Format the partition you created for Win, install. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: bcdedit /set {bootmgr} path EFICLOVERCLOVERX64.efi 5. You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
Dual-boot with Windows installed first (on one drive), UEFI Only:
If you already have Windows and you don't want to lose all your data there is a hope:
I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
You need bootable Mac Installer and a full system restore image (link is in my video's description).
(You may see errors if your EFI partition is not 200 MB)
Boot into your Windows, resize your partition or create one for Mac. Boot into your Mac installer and in Disk Utility format the partition you created. Restore from image: select your full system restore image. When it's finished restoring you just need to restart, then boot to the system with your usb. When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: bcdedit /set {bootmgr} path EFICLOVERCLOVERX64.efi 7. You're done! You can select your old Windows and your new macOS!
(Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
IF YOU GETTING ERRORS DURING MAC RESTORE:
- Make sure you have partitions in GPT
- Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
- Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
- It's because your EFI is not 200 MB or not an 'Apple' original EFI, but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
- You also could 'mount' the EFI from Windows:
1st method: open cmd in administrator mode and type:
diskpart
list vol (Now select the 'System' volume,(FAT 32) For example I select 4)
sel vol 4
list part(Select System type partition, for example 2)
sel part 2
assign letter=b(This will 'mount' your EFI partition)
Open Explorer++ or TotalCommander in administrator mode to manage EFI
remove letter=b (This will 'unmount' your EFI)
2nd method: open cmd in administrator mode and type:
mountvol b: /s (This will mount your EFI)
Open Explorer++ or TotalCommander in administrator mode to manage EFI
mountvol b: /d (This will unmount your EFI)
Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
Notes:
2019.06.05: Updated to 10.14.5 -> no problem when/after installing
2019.04.25: Optimized touchpad scrolling -> updated install files
2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack.
2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing 'FakePCIID_Intel_HDMI_Audio.kext' -> fixed freezing during boot. Fixed brightness levels by installing 'AppleBacklightFixup.kext'. Also updated bootpack & postinstall zip down in attachments.
2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments 'acer_aspire_v591g-55tu_clover.zip'-> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
2018.12.09: Updated to 10.14.2 -> did without any complication
2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by 'AppleIntelSKLGraphicsFramebuffer.kext' rollback from 10.14.
2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding 'AppleGraphicsDevicePolicy.kext' patches to config.plist, HDMI audio not working